19
DRT2 Slaves Section 1-2
Basic Output Unit (OUT) + Expansion
Input Unit (IN):
Example: DRT2-OD16+XWT-ID16
Required. (I/O power supply required for
both Units.)
Basic Output Unit (OUT) + Expansion
Output Unit (OUT):
Example: DRT2-OD16+XWT-OD16
Required. (I/O power supply required for
both Units.)
Basic Output Unit (OUT) + Expansion
Output Unit (IN):
Example: DRT2-ROS16+XWT-ID16
Required. (I/O power supply required for
Expansion Unit only.)
Basic Output Unit (OUT) + Expansion
Output Unit (OUT):
Example: DRT2-ROS16+XWT-OD16
Required. (I/O power supply required for
Expansion Unit only)
Device combination I/O power supply to Expansion Unit
Slave
type
Communi-
cations
cables
Name Model Slave
installa-
tion
I/O con-
nection
method
Connect-
ing
devices
Internal
power
supply
I/O power
supply
Environ-
ment-
resistive
Slaves
Round
communi-
cations
connector
Environ-
ment-resis-
tive
Terminals
DRT2-ID08C Screw-
mounted
Round
water-
proof con-
nector (for
XS2)
Cable with
XS2 Con-
nector +
Sensor
with Con-
nector
Shares
communi-
cations
power sup-
ply
Shares
communi-
cations
power sup-
ply
DRT2-ID08C-1
DRT2-HD16C
DRT2-HD16C-1
DRT2-OD08C Requires
external
power sup-
ply.
Con-
nected
with XS4@
connector.
DRT2-OD08C-1
DRT2-ID04CL
DRT2-ID04CL-1
DRT2-OD04CL
DRT2-OD04CL-1
DRT2-ID08CL
DRT2-ID08CL-1
DRT2-HD16CL
DRT2-HD16CL-1
DRT2-OD08CL
DRT2-OD08CL-1
DRT2-WD16CL
DRT2-WD16CL-1
DRT2-MD16CL
DRT2-MD16CL-1
Analog
Slaves
Standard
rectangular
connector
Analog Ter-
minals
DRT2-AD04 DIN Track M3 termi-
nal block
(detach-
able)
Ter minal
block con-
nection
Separate
power sup-
ply
required
for con-
nected
devices,
such as
sensors
and actua-
tors.
DRT2-AD04H
DRT2-DA02
Te m p er a -
ture Input
Terminals
DRT2-TS04T
DRT2-TS04P
To Next Page
Loading...
Need help?
General
