559
Connectable Devices Appendix D
Note The Power Supply Sharing Taps are sold through the OMRON 24 Service Co., Ltd.
Connectors for I/O Power Cables to Environment-resistive Slave
Output Terminals
DRT2-OD08C(-1)
Always use DeviceNet Communications Connectors that conform to DeviceNet Connector standards.
T-joints
Y-joint Plugs and Sockets
Connector Covers for Environment-resistive Slaves
MIL Cables for Connector Terminals
Cables with Connectors on Both Ends (40-pin × 1 and 20-pin × 2)
Model Specifications Manufacturer
XS4W-D421-1@@-A Cable with connectors on both ends (socket and plug) OMRON
XS4F-D421-1@@-A Cable with connector on one end (female socket)
XS4H-D421-1@@-A Cable with connector on one end (male plug)
Model Specifications Manufacturer
XS4R-D424-5 Shielded T-joint
Use to branch an I/O power supply cable for an Environment-resistive
Slave.
OMRON
Model Specifications Manufacturer
XS2R-D426-@11-F With cable Use for Environment-resistive Slaves with
16 inputs or 16 outputs. (Branches a single
connector's signals into two connectors.)
OMRON
XS2R-D426-1 Without cable
Model Specifications Manufacturer
XS2Z-12 Waterproof Cover (meets IP67 standards) OMRON
XS2Z-15 Dust Cover
Model Applicable Slave Applicable Relay Terminal Manufacturer
G79-I@C DRT2-ID16ML G7TC-ID16/IA16 OMRON
DRT2-OD16ML-1 G7TC-OC16-1
G79-O@C DRT2-OD16ML G7TC-OC16/OC08
G70D-SOC16/VSOC16
G70DFOM16/VFOM16
G70A-ZOC16-3
G70D-SOC08
G70R-SOC08
DRT2-OD16ML-1 G70D-SOC16-1
G70D-FOM16-1
G70A-ZOC16-4
To Next Page
Loading...
Need help?
General
