Chapter 4: Configuration
SetNetGo in the System/Backup & Restore Options. See: Download a Debuginfo File for
Support on page 26.
l
Safety Zone Configuration—Contact your OMRON representative to configure the
safety zones.
WARNING: PERSONAL INJURY OR PROPERTY DAMAGE RISK
OMRON is not responsible for any risks incurred by modifying safety
zone sizes or other OS32C laser settings.
WARNING: You need to modify the safety zones:
l
If your payload overhangs the AMR's default dimensions, and
the size/shape of the laser safety zones need to be modified.
l
If operating on a floor surface that has poor traction to the extent
that the AMR cannot stop reliably within the default zones.
31500-000 Rev A HD-1500 Platform User's Manual 134
To Next Page
Loading...
