Omron HD-1500 Platform - Before Unpacking; Unpacking Considerations

63 HD-1500 Platform User's Manual 31500-000 Rev A
3.3 Before Unpacking
Always ship and store the power supply box, and the docking target in an upright position in
a clean and dry area. Do not lay the crates on their side or any other non-upright position.
This could damage the power supply box, and the docking target.
For dimensions and weight of the crates, see: Power Supply Box Unpacking on page 95, and
Docking Target Unpacking on page 88.
3.3 Before Unpacking
Carefully inspect all shipping boxes and crates for evidence of damage during transit. If any
damage is indicated, request that the carrier’s agent be present at the time the crate is
unpacked.
3.4 Unpacking Considerations
Before signing the carrier’s delivery sheet, compare the actual items received (not just the pack-
ing slip) with your equipment purchase order. Verify that all items are present and that the
shipment is correct and free of visible damage.
l
If the items received do not match the packing slip, or are damaged, do not accept the
delivery.
l
If the items received do not match your order, contact your OMRON representative
immediately.
Retain the containers and packaging materials. These items may be necessary to settle claims
or, at a later date, to relocate the equipment.
At a minimum the shipment contains:
l
A fully assembled HD-1500.
The power supply box, docking target, and the battery are packed in separate crates and ship
separately. Any optional devices or accessories purchased with the HD-1500, are packed in a
carton, and placed in the main crate containing the HD-1500.
!
WARNING: PERSONALINJURYORPROPERTYDAMAGERISK
Follow all unpacking safety instructions and use appropriate tools and equip-
ment. Failure to do so could result in personal injury or property damage.
You require the following tools to unpack each crate (all tools and equipment except for the
pendant are user-supplied):
Table 3-1. Required Tools and Equipment to Unpack the HD-1500 Crate
Tool QTY Description
PPE N/A Eye protection, toe protection and gloves.
OMRON Pendant 1 Pendant is needed to drive the HD-1500 down the ramp.
Forklift or similar
device
1 The forklift or any other lifting machine you use must be safety
rated for at least 1100 kg of weight.
13 mm socket 1 The impact driver is used to remove side screws connecting the