239 HD-1500 Platform User's Manual 31500-000 Rev A
8.7 Replacing Non-Periodic Parts
Non-Periodic Parts
(User-Serviceable)
Part Number Description
l side skin, left 68121-000 HD-1500 left side skin assembly.
l side skin, right 68123-000 HD-1500 right side skin assembly.
Battery pack 68330-000 OMRON battery pack used for HD-1500.
Light Discs
Before you begin, press an E-Stop button and turn the HD-1500 off.
You require the following tools to replace the light disc LED strip:
l 7 mm nut driver
l 1 N.m torque wrench
l 2.5 mm hex wrench
l Adhesive
Follow these steps to replace the LED strip in the light disc:
1.
Unlatch the side skin, and pull away from the platform just enough so you can
disconnect the cable as shown in the following figure.
Figure 8-26. Disconnecting the Cable from the (A) LED Mount Plate
2.
Once the cable is disconnected, remove the skin completely.
3.
Next, unscrew the four screws holding the electronics bay seal cover ((A) in Figure 8-27.
) as shown in the following figure. This will allow the LED mount plate ((A) in Figure
8-26. ) to come off once unscrewed from the skin.
To Next Page
Loading...
