Chapter 2: Safety
WARNING: ELECTRICALSHOCKRISK
Improper installation of the power supply box could result in elecrical
shock hazard. You must ensure of the safe and proper installation of the
power supply box in accordance with the applicable rules and reg-
ulations, and by qualified personnel.
Storage
l
Store both power supply box and the docking target at: -20 to 60°C
l
Humidity: 5% to 95%, non-condensing
Environmental Considerations
l
In case of fire, use a class C extinguisher: foam, dry chemical, or CO₂.
l
IP rating for the power supply box is IP20.
l
IP rating for the docking target is IP20.
NOTE: The IPrating for the copper charging pads is IP10. Do not expose
them to liquid.
2.14 Additional Safety Information
Contact your OMRON representative for other sources of safety information.
Mobile Robot HDSafety Manual (Cat. No. I647)
The Mobile Robot HDSafety Manual (Cat. No. I647) is included with your HD-1500 and
provides detailed information about safe operation of your HD-1500. It also provides resources
for information about relevant standards.
2.15 Disposal
Dispose of in accordance with applicable regulations.
Customers can contribute to resource conservation and protecting the environment by the
proper disposal of WEEE (Waste Electronics and Electrical Equipment). All electrical and elec-
tronic products should be disposed of separately from the municipal waste system via des-
ignation collection facilities. For information about disposal of your old equipment, contact
your OMRON representative.
Do not incinerate or dispose of the HD-1500 battery. Return the end-of-life or defective batteries
to a designated facility per the appropriate local regulations.
31500-000 Rev A HD-1500 Platform User's Manual 58