57 HD-1500 Platform User's Manual 31500-000 Rev A
2.13 Charging Station
Figure 2-15. Facility Power Cable
4.
Then, remove the facility power cable from the electrician access box.
Installation
You must follow the instructions provided in this document for safe and correct installation of
the charging station. Consider the following safety measures for power supply box installation:
l
The power supply box and the docking target must be properly secured to the wall or
floor prior to start-up. For instructions on how to install the power supply box and the
docking target refer to Installing the Charging Station on page 110.
WARNING: PERSONALINJURYRISK
Improper installation of the power supply box could result in tipping
hazard. You must make sure that the power supply box is safely and
properly installed.
l
For instructions on how to safely move the power supply box refer to Power Supply Box
Unpacking on page 95.
l
The power supply box must be installed according to the local regulations or codes, and
by authorized personnel or licensed electricians.
To Next Page
Loading...
