Omron HD-1500 Platform - Power Supply Box, and Docking Target Crates

Chapter 3: Setup
A
B
D
D
C
C
Figure 3-1. Battery Storage Position
ID Description ID Description
A Front of the battery C Side of the battery
B Rear of the battery D Top of the battery
Maintenance
Every six months:
l
Inspect the battery for damage or leaks.
l
Connect the battery to a charger (power supply box) and allow to fully balance. To
check the state of charge, press and hold the On button until the LED lights start blink-
ing (battery shows all solid LEDs when fully balanced), see: Battery Indicators and Con-
trols on page 184.
For dimensions, and weight of the battery crate, see: Battery Unpacking on page 79.
Power Supply Box, and Docking Target Crates
Ship and store the power supply box, and the docking target only under the conditions
described in this section.
IMPORTANT: To prevent damage to electronic safety components, and to
ensure the safe operation of the power supply box, and the docking target,
observe the shipping and storage instructions in this section.
Ship and store the HD-1500 in:
l
A temperature-controlled environment, ranging from -20 to 60°C. The humidity range is
5% to 95%, non-condensing.
l
The original shipping crates, which are designed to prevent damage from shock and
vibration in transit. Protect the crates from excessive shock and vibration.
Use a rated forklift, pallet jack or similar devices to move the shipping crates.
31500-000 Rev A HD-1500 Platform User's Manual 62