Chapter 8: Maintenance
Figure 8-37. Pulling the Skin Just Enough to Disconnect the Cable
Figure 8-38. Disconnecting the Cable
2.
Once the cable is disconnected, remove the rear skin completely. You can now access
the back of the Operator Panel.
3.
Unscrew the four M4 locknuts that attach the Operator Panel to the mount bracket.
4.
Grab the Operator Panel and remove from the mount bracket.
Side-Mount Lasers (Side Lasers)
Side-mount optional lasers are an option for payload structure development. You need to relo-
cate these side lasers if the payload structure obstructs their field of view.
IMPORTANT: It is the end user's responsibility to ensure that the payload struc-
ture does not obstruct the side lasers' beam.
31500-000 Rev A HD-1500 Platform User's Manual 246
To Next Page
Loading...
