Chapter 3: Setup
1500 to the pallet.
17.
Next, you need to install the battery into the HD-1500. Roll the battery up the ramp and
install as displayed in the following figure. For instructions on how to install the bat-
tery, see: Installation on page 104.
Figure 3-20. Installing the Battery
18.
Once the battery is installed, you need to connect the pendant to the HD-1500 in order
to drive the HD-1500 down the ramp. Connect the pendant to the pendant port located
on the HD-1500 Operator Panel.
31500-000 Rev A HD-1500 Platform User's Manual 76
To Next Page
Loading...
