Chapter 3: Setup
Follow these steps to remove the docking target from its shipping crate:
1. Remove the brackets holding the front panel to the housing crate using a screwdriver or
any tool that allows you to pop open the brackets.
Figure 3-39. Brackets Holding the Front Panel to the Housing Crate
2. Remove the front panel.
Figure 3-40. Front Panel Removed
3. Remove the screws attaching the housing crate to the base pallet using a 13 mm socket
with impact driver.
4. Next, remove the housing crate by pulling it away.
31500-000 Rev A HD-1500 Platform User's Manual 90
To Next Page
Loading...
