Omron SYSDRIVE 3G3RV Series User Manual

5
-
20
*The setting range for acceleration/deceleration times will depends on the setting for C1-10. When C1-10 is set to 0, the setting range for acceleration/decel-
eration times becomes 0.00 to 600.00 seconds.
C1-09
Decelera-
tion Stop
Time
The deceleration time when
the multi-function input
“Deceleration stop” is set to
ON.
This function can be used a
stopped method when a fault
has been detected.
0.0 to
6000.0
*
10.0 s No A A A 208H 6-18
Fast Stop
Time
C1-10
Accel/decel
time setting
unit
0: 0.01-second units
1: 0.1-second units
0 or 1 1 No A A A 209H 6-19
Acc/Dec
Units
C1-11
Accel/decel
time switch-
ing fre-
quency
Sets the frequency for auto-
matic acceleration/decelera-
tion switching.
Below set frequency: Accel/
decel time 4
Above set frequency: Accel/
decel time 1
The multi-function input
“accel/decel time 1” or
“accel/decel time 2” take pri-
ority.
0.0 to
400.0
0.0 Hz No A A A 20AH 6-19
Acc/Dec
SW Freq
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English