Omron SYSDRIVE 3G3RV Series User Manual

5
-
30
nReference Frequency Hold: d4
Parameters for the reference frequency hold function are shown in the following table.
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop
d4-01
Frequency
reference
hold func-
tion selec-
tion
Sets whether or not frequen-
cies on hold will be
recorded.
0: Disabled (when operation
is stopped or the power is
turned on again starts at
0.)
1: Enabled (when operation
is stopped or the power is
turned on again starts at
the previous hold
frequency.)
This function is available
when the multi-function
inputs “accel/decel Ramp
Hold” or “up/down” com-
mands are set.
0 or 1 0 No A A A 298H 6-64
MOP Ref
Memory
d4-02
+ - Speed
limits
Set the frequency to be add
to or subtracted from the
analog frequency reference
as a percent, taking the max-
imum output frequency to be
100%.
Enabled when the increase
(+) speed command or
decrease (-) speed command
is set for a multi-function
input.
0 to
100
10% No A A A 299H 6-68
Trim Con-
trol Lvl

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English