Omron SYSDRIVE 3G3RV Series

1
-
6
Table 1.4 Differences in Software (Continued)
Name Parameter Number Asia
Europe


suffixed -E


LCD brightness
adjustment
o1-05 Cannot change.
Setting Range: 0 to 5
Adjusts the brightness in five steps.
Operation selection
when Digital Opera-
tor is disconnected
o2-06
Factory setting
0 (Disabled)
Factory setting
0 (Disabled)
Cumulative opera-
tion time selection
o2-08
Factory setting = 0
(Cumulative time when the Inverter
power is ON)
Factory setting = 1
(Cumulative Inverter run time)
Fault trace and fault
history initialization
o2-12 Cannot clear
0: Disabled
(U2, U3 are held.)
1: Initialize Enabled
(U2, U3 are cleared and o2-12 returns
to 0.)
Fault history U3-01 to U3-20
Four fault history records are stored.
U3-01 to U3-08 are enabled.
Serial communications addresses 90H
to 97H are enabled. (800H to 813H are
disabled)
Ten fault history records are stored.
U3-01 to U3-20 are enabled.
Serial communications addresses
800H to 813H and 90H to 97H are
both enabled.