Omron SYSDRIVE 3G3RV Series

Index
Index-1
Symbols
+/- speed, 6-68
Numerics
2-wire sequence, 6-12
3-wire sequence, 6-13
A
AC reactor, 2-22
acceleration and deceleration times, 6-19
Advanced Programming Mode, 3-5, 3-9
Analog Opertor, 10-10
ASIC internal RAM fault (CPF07), 7-7
ASIC version fault (CPF10), 7-7
auto restart external outputs, 6-59
autotuning, 4-11
Autotuning Mode, 3-5, 3-12
B
Baseblock circuit error (CPF02), 7-7
Braking Resistor, 2-26
Braking Resistor Unit, 2-26, 10-7
Braking Unit, 2-26, 10-7
C
common specifications, 9-4
Communications on Standby (CALL), 7-10
Communications Option Card A/D converter error (CPF20),
7-7
Communications Option Card DPRAM error (CPF23), 7-7
Communications Option Card model code error (CPF22), 7-
7
Communications Option Card self diagnostic error (CPF21),
7-7
control circuit terminals for Asian models, 2-29
control circuit terminals for European models, 2-37
Control Fault (CF), 7-5
Control method selection error (OPE06), 7-11
control methods, 4-10
Control Power Fault (UV2), 7-3
Cooling Fin Overheating (OH), 7-3, 7-8
CPU internal A/D converter error (CPF04), 7-7
CPU internal A/D converter error (CPF05), 7-7
CPU-ASIC mutual diagnosis fault (CPF09), 7-7
crimp terminal, 2-14, 2-54
D
daily inspection, 8-2
DC reactor, 2-22
deceleration stop, 6-18
detecting motor overspeed, 6-146
detecting PG open circuit, 6-146
Digital Operator, 3-2
Digital Operator Communications Error 1 (CPF00), 7-6
Digital Operator Communications Error 2 (CPFO1), 7-6
Digital Operator Connection Fault (OPR), 7-6
Digital Operator display functions and levels, 5-3
Drive Mode, 3-5, 3-7
dwell function, 6-22
E
EEPROM error (CPF03), 7-7
EEPROM write error (ERR), 7-12
electromagnetic switch (MC), 2-23
Excessive Speed Deviation (DEV), 7-5, 7-9
External error detected for Communications Card other than
SI-K2 (EFO), 7-9
external error function, 6-71
External fault (input terminal 3) (EF3), 7-6
External fault (input terminal 4) (EF4), 7-6
External fault (input terminal 5) (EF5), 7-6
External fault (input terminal 6) (EF6), 7-6
External fault (input terminal 7) (EF7), 7-6
External fault input from Communications Option Card
(EF0), 7-6
F
FJOG/RJOG commands, 6-70
Forward/Reverse Run Commnads Input Together (EF), 7-8
frequency reference, 6-6
frequency reference adjustment, 6-27
Fuse Blown (PUF), 7-2