Call Out Description
1 Connector C release tab (labeled PUSH)
6. To disconnect connector B:
a. Place your right arm under the CMA to support it and grasp the back end of
connector B with your right hand.
b. Use your left thumb to pull the connector B release lever to the left, away from the
right slide-rail (callout 1), and use your right hand to pull the connector out of the
slide-rail [1 and 2].
Call Out Description
1 Connector B release lever
7. To disconnect connector A:
a. Place your left arm under the CMA to support it and grasp the back end of connector
A with your left hand.
b. Use your right thumb to pull the connector A release lever to the right, away from the
left slide-rail (callout 1), and use your left hand to pull the connector out of the slide-
rail [1 and 2].
Call Out Description
1 Connector A release lever
Appendix C
Rackmounting the Server
C-27
To Next Page
Loading...
Need help?
General
