Phoenix Contact RFC 4072S User Manual

Startup and validation
108580_en_02 PHOENIX CONTACT 133 / 272
The following information is displayed in the “Cockpit” editor:
Figure 4-56 Standard controller in the “RUN” state
If an installation error prevents the system from starting up, a corresponding error message
appears on the display and in PLCnext Engineer.
The iSPNS 3000 is in the FAIL state because the example project has not yet been trans-
ferred to the iSPNS 3000.

Phoenix Contact RFC 4072S Specifications

General

Brand	Phoenix Contact
Model	RFC 4072S
Category	Controller
Language	English