Installing firmware and software updates
R&S
®
TSMA6
102User Manual 4900.8057.02 ─ 11
The following steps are similar to the installation using a USB stick, see Chapter 8.3.3,
"Installation using a USB stick", on page 92, step 9 and following.
8.6 Software update - details
Make sure, that the latest firmware is installed on the device before you start with the
installation of software packages.
For software installations (NESTOR, SmartONE, ViCom) installation, only use the
TSMA6-specific setup files (TSMAx-<AppName>-|<version>-setup.exe).
Software update - details