Configuring the R&S TSMA6
R&S
®
TSMA6
46User Manual 4900.8057.02 ─ 11
8. The remote desktop connection is established.
The R&S TSMA6 can be controlled from the remote PC.
6.2 Changing IP addresses
To change the IP addresses, refer to the following.
●
Chapter A.2.2.4, "LAN", on page 163
●
Chapter A.2.2.5, "LAN SCAN", on page 164
6.3 Changing WLAN settings
To change the WLAN settings (WLAN mode and preferred band), proceed as follows.
To change WLAN mode and preferred band.
1. Start the web-GUI of the R&S TSMA6.
2. Navigate to "Configuration" > "Connectivity" > "WLAN".
3. Select the following settings according to your needs or back to the default set-
tings.
● "Wireless Mode"
● "Preferred band"
● "Wireless Mode Ext"
See also "WLAN Settings" on page 162.
Changing WLAN settings
To Next Page
Loading...
