R&S TSMA6 - Selecting Measurement Mode

Configuring the R&S TSMA6
R&S
®
TSMA6
47User Manual 4900.8057.02 ─ 11
6.4 Selecting measurement mode
Select the measurement mode with the following steps.
1. Start the R&S TSMA6 web GUI (see Chapter 6.1.1, "Using the R&S TSMA6 web
GUI", on page 43).
2. The measurement modes can be configured via the radio button from the web GUI
under "Configuration" > "System" > "Mode".
Selecting measurement mode