R&S TSMA6 User Manual

Troubleshooting
R&S
®
TSMA6
143User Manual 4900.8057.02 ─ 11
5. Check the IP address of the WLAN connection on your handheld device. It must be
in the subnet 192.168.137.xxx.
● If the subnet is correct, continue with Chapter 11.12, "Web GUI locally not
accessible", on page 143.
● If the subnet is not correct, try to reconnect. If it fails again, contact R&S sup-
port.
6. Check the WLAN settings, see Chapter 6.3, "Changing WLAN settings",
on page 46.
11.12 Web GUI locally not accessible
Open the web GUI locally. Start the Internet Explorer and enter the following URL to
open the R&S TSMA6 web GUI.
http://localhost
1. Check the URL in the browser dialog. Following URL must be displayed:
http://localhost/TSMA/Html/overview.php
● If the URL is not correct, enter the correct URL and reload the URL. If it fails
again, reinstall the firmware Chapter 8.3, "Updating firmware/software/tools -
general instructions", on page 84.
● If the URL is correct and the following error status is displayed, continue with
step 2.
Web GUI locally not accessible

R&S TSMA6 Specifications

General

Brand	R&S
Model	TSMA6
Category	Scanner
Language	English