R&S TSMA6 - Connecting with R&S TSMA6 WLAN Access Point

Getting started
R&S
®
TSMA6
26User Manual 4900.8057.02 ─ 11
Figure 3-5: Power button
For the power state LEDs, see Chapter 3.2.5, "Status LEDs", on page 35 .
For a coldstart, hold the power on/off button at least 5 s.
3.1.9 Connecting with R&S TSMA6 WLAN access point
The R&S TSMA6 has a built-in WLAN access point. .
The usage of WLAN is restricted to indoor use.
1. On the host PC, click the Network symbol in the task bar.
2. Select the correct WLAN (in this example: "TSMA6-101084").
Preparing for use