Installing firmware and software updates
R&S
®
TSMA6
107User Manual 4900.8057.02 ─ 11
8.6.2.2 NESTOR local installation
Follow the general instructions in Chapter 8.3.1, "Local execution of the setup file",
on page 84, step 1 to step 6.
The "R&S Software Distributor" comes up. Select "Local Installation" and "Next".
All subsequent steps are similar to local firmware installation, see Chapter 8.3.1, "Local
execution of the setup file", on page 84, step 7 and following.
Do not switch off or unplug from power while running firmware/software update.
8.6.2.3 NESTOR remote installation
Follow the general instructions in Chapter 8.3.2, "Remote installation of the setup file",
on page 88, step 1 to step 3.
The "R&S Software Distributor" comes up. Select "Remote Installation" and "Next >".
Software update - details