R&S TSMA6 - Page 85

Installing firmware and software updates
R&S
®
TSMA6
85User Manual 4900.8057.02 ─ 11
2. Switch on the R&S TSMA6 via the power button.
3. Copy the setup file for firmware/software/EDGE/TsmeTools (.zip or .exe) into a
temporary directory on the R&S TSMA6.
4. Check that R&S TSMA6 is in "PC Mode", see Chapter 8.2, "Prerequisites",
on page 82.
5. Open the Windows Explorer and execute the setup file
TSMAx-Setup-<Version>.exe.
6. The "R&S Software Distributor" window comes up. Select "Local Installation" and
"Next >".
7. In the License Agreement window, check "I accept the license agreement".
Updating firmware/software/tools - general instructions