R&S TSMA6 - Installing Firmware and Software Updates; Downloading Setup File; Prerequisites

Installing firmware and software updates
R&S
®
TSMA6
82User Manual 4900.8057.02 ─ 11
8 Installing firmware and software updates
8.1 Downloading setup file
Firmware and Windows operating system packages for the R&S TSMA6 can be down-
loaded from the Rohde & Schwarz web page https://www.rohde-schwarz.com/us/firm-
ware/tsma6/. The firmware setup file can be found under the title R&S TSMAx Firm-
ware V ww.xx.yy.zz.
The R&S TSME Tools and EDGE browser setup packages can be downloaded from
the Rohde & Schwarz web page https://www.rohde-schwarz.com/us/software/tsma6/.
For R&S NESTOR, R&S SmartONE and R&S ViCom, contact the appropriate sales
channel.
8.2 Prerequisites
To execute the setup on the R&S TSMA6, the mode of operation has to be "PC Mode".
1. Open the R&S TSMA6 web GUI (see Chapter 8.3.4, "Calling R&S TSMA6 web
GUI", on page 95).
2. The mode of operation is displayed in the "Overview" page. If the mode is already
"PC Mode", you can skip this section.
Prerequisites