Measurement Setup
R&S
®
TSMA6
81User Manual 4900.8057.02 ─ 11
If the R&S TSMA6 is connected with a R&S TSMA6-BP, DC power must be connected
to the R&S TSMA6-BP (1).
Do not connect the DC power to the R&S TSMA6 (2).
Figure 7-22: DC IN connectors
1 = DC IN connector R&S TSMA6-BP
2 = DC IN connector R&S TSMA6
Use cases
To Next Page
Loading...
