R&S TSMA6 - Bluetooth; WLAN

Web GUI reference
R&S
®
TSMA6
161User Manual 4900.8057.02 ─ 11
Visibility ← Bluetooth Connection
The Bluetooth adapter can be set to visible or hidden for external devices.
Bluetooth Device(s) ← Bluetooth Connection
Press "Refresh" to update visible Bluetooth devices. For pairing a device, select it in
the file box and press "Connect".
A.2.2.2 WLAN
The "WLAN" tab is used to recall and configure settings of the embedded WLAN mod-
ule.
The "WLAN" tab is only available if the switch WLAN/Blutooth is in position "On".
WLAN Adapter............................................................................................................ 161
└ Status (WLAN Adapter)................................................................................ 161
└ Permanent.................................................................................................... 161
└ SSID..............................................................................................................161
└ Network Key..................................................................................................161
└ TCP/IP Mode (WLAN Client)........................................................................ 162
WLAN Settings............................................................................................................162
└ Wireless Mode.............................................................................................. 162
└ Preferred Band..............................................................................................162
└ Wireless Mode Ext........................................................................................162
WLAN Adapter
Specifies the configuration details for the WLAN adapter.
Status (WLAN Adapter) ← WLAN Adapter
Switch the WLAN adapter on and off.
Status = On The WLAN is on.
Status = Off and
Permanent = Off
The WLAN is switched off for the current session. After the next power cycle, the
WLAN is switched on again.
Status = Off and
Permanent = On
The WLAN is permanently switched off even after a power cycle.
Permanent ← WLAN Adapter
If enabled, the WLAN is permanently on.
SSID ← WLAN Adapter
Click "Refresh" to scan for available WLAN access networks. Available networks are
listed in the file select box.
Network Key ← WLAN Adapter
Enter the network key to connect with the selected WLAN network as a client.
Configuration