R&S TSMA6 User Manual

Web GUI reference
R&S
®
TSMA6
162User Manual 4900.8057.02 ─ 11
TCP/IP Mode (WLAN Client) ← WLAN Adapter
The IP address configuration in a client connection can be switched between "DHCP"
(receive IP address from host) and static IP ("Static").
Enter the static IP configuration in the dialog below.
●
IP address
●
Subnet Mask
●
Default Gateway
●
DNS Server
It is possible to specify a primary and a secondary DNS server.
WLAN Settings
Specify the WLAN standard and the preferred band. If you change the default settings,
the new settings are marked orange. To reset the default settings, these settings are
marked green.
Wireless Mode ← WLAN Settings
Recall and change the settings of the WLAN adapter in this section. The following
modes are supported:
●
5 GHz 802.11a
●
2.4 GHz 802.11b
●
2.4 GHz 802.11g
●
2.4 GHz 802.11b/g (default)
●
Dual Band 802.11a/g
●
Dual Band 802.11a/b/g
To change the mode, select "Change".
To reset the default settings, select "Default".
Preferred Band ← WLAN Settings
Select the following preferred band settings.
●
No Preference
●
Prefer 2.4 GHz band (default)
●
Prefer 5 GHz band
To change the preferred band, select "Change".
To reset the default setting, select "Default".
Wireless Mode Ext ← WLAN Settings
Select one of the following wireless mode settings
●
Disabled
●
802.11n
●
802.11ac
●
802.11ax
To change the mode, select "Change".
To reset the default settings, select "Default".
Configuration

R&S TSMA6 Specifications

General

Brand	R&S
Model	TSMA6
Category	Scanner
Language	English