R&S TSMA6 - R&S TSME Tools Local Installation

Installing firmware and software updates
R&S
®
TSMA6
97User Manual 4900.8057.02 ─ 11
8.4.1 Preparation
1. Download the R&S TSME Tools setup file
TSMAx-TsmeTools-v<x.y.z.z1>.exe from https://www.rohde-schwarz.com/
software/tsma6/.
2. Choose the way of installation (local, remote, USB stick) and follow the instructions
on how to update the R&S TSME Tools (see Chapter 8.3, "Updating firmware/soft-
ware/tools - general instructions", on page 84).
8.4.2 R&S TSME Tools local installation
Follow the general instructions in Chapter 8.3.1, "Local execution of the setup file",
on page 84, step 1 to step 6.
The "R&S Software Distributor" window comes up. Select "Local Installation" and
"Next".
All subsequent steps are similar to local firmware installation, see Chapter 8.3.1, "Local
execution of the setup file", on page 84, step 7 and following.
Do not switch off or unplug from power while running firmware/software update.
R&S TSME Tools update