Measurement Setup
R&S
®
TSMA6
79User Manual 4900.8057.02 ─ 11
For the DC power between R&S TSMA6-BP and R&S TSME6, you need the power
cable R&S TSMA6-BPPT.
Using an R&S TSME30DC (see Figure 7-19), you can connect the RF antenna to two
RF connectors with different frequency ranges (24 GHz to 27.5 GHz and 27 GHz to 30
GHz). The R&S TSME44DC offers only one RF connector with a frequency range from
24 GHz to 44 GHz.
If the R&S TSMA6 is connected with an R&S TSMA6-BP, DC power must be connec-
ted to the R&S TSMA6-BP (1).
Do not connect the DC power to the R&S TSMA6 (2).
Figure 7-20: DC IN connectors
1 = DC IN connector R&S TSMA6-BP
2 = DC IN connector R&S TSMA6
Use cases
To Next Page
Loading...
