Installing firmware and software updates
R&S
®
TSMA6
87User Manual 4900.8057.02 ─ 11
Note: Do not switch off or unplug from power while running firmware/software
update.
11. The device reboots automatically after the installation is complete.
If the automatic reboot is not started, reboot manually.
12. If the firmware package contains a new mainboard firmware, a separate flash rou-
tine is started in a post process, see Chapter 8.3.5, "Subsequent steps after firm-
ware update", on page 96).
13. Reload the web GUI and verify the displayed firmware/software version in the
"Overview" menu. The installed version needs to be indicated.
Updating firmware/software/tools - general instructions
To Next Page
Loading...
