Rexroth IndraDrive Requirements to the Mains Connection 10-11
DOK-INDRV*-SYSTEM*****-PR02-EN-P
Note: Overvoltage at the components can occur
• due to lightning strikes or
• due to inductive or capacitive coupling on lines.
Use overvoltage limiters at the machine or installation when
the overvoltage occurring at the Rexroth components is
greater than the max. allowed overvoltage.
Use the overvoltage limiters at long lines run through the
building / the hall and run in parallel with power and mains
cables.
Electrically place the overvoltage limiter at the control cabinet
input.
To Next Page
Loading...
