16-4 Replacing Devices Rexroth IndraDrive
DOK-INDRV*-SYSTEM*****-PR02-EN-P
16.3 Fault Report
Fault Report
for Drive Systems
Date:
Report No.:
This fault report is intended to help eliminate problems that might possibly be related to drive systems.
Please fill it out carefully and send it, together with the parameter file with which the fault occurred, to
Bosch Rexroth.
Contact person:
Customer (machine manufacturer):
End customer:
Branch of industry:
Telephone:
Fax:
E-mail: @
System description:
Firmware
Firmware version:
FWA- - - V -MS
Software:
DriveTop version: SWA-DTOP**-INB- V -MS
Operating system:
Service pack:
Language:
PC designation:
Hardware configuration (system RAM, hard
disk memory,...):
Drive system
Power section:
Type code: - - - -
Serial number: SN
Hardware index:
Control section:
Type code: - - - - - - -
Serial number: SN
Hardware index:
Supply module:
Type code: - - - -
Serial number:
Motor
Type designation:
Serial number: S.No.
Motor encoder:
Mounting position:
Additional components (e.g. control system involved,
external encoder, filter, cooling system in control
cabinet,...):
Fault description (detailed description of situation before, during and after fault occurred):
To quickly resolve your problem we ask you to send us also the parameter set with which the fault occurred.
Name of parameter set file:
To Next Page
Loading...
