REXROTH IndraDrive C User Manual

Rexroth IndraDrive Appendix 19-3
DOK-INDRV*-SYSTEM*****-PR02-EN-P
19.2 Short Designations of Products
Short designation Type Description
CZ 1.2 additional capacitor
DLT isolating transformer
DST matching transformer
HCS02.1 drive controller
HCS03.1 drive controller
HLB01.1C DC bus resistor unit
HLB01.1D DC bus resistor unit
HLC01.1C DC bus capacitor unit
HLC01.1D DC bus capacitor unit
HMD01.1 drive controller
HMS01.1 drive controller
HMV01.1-E supply unit
HMV01.1-R supply unit
HNF01.1 mains filter
HNL01.1 mains choke
HNK01.1 mains filter mains filter with integrated mains choke, variant for assembly
MSK040 synchronous motor
MSK050 synchronous motor
MSK060 synchronous motor
NFD03.1 mains filter
RKL ready-made motor power cable
RKS ready-made control cable
RKG ready-made encoder cable
VCP01 small operator terminal variant for assembly
VCP02 small operator terminal variant for assembly
VCP05 small operator terminal variant for assembly
VCP08 small operator terminal variant for assembly
VCP20 small operator terminal variant for assembly
VCP25 small operator terminal variant for assembly
Fig. 19-3: Short designations of products

REXROTH IndraDrive C Specifications

General

Protection Class	IP20
Voltage Range	200 V to 480 V
Input Voltage	200 to 480 VAC
Control Modes	Speed, Torque, Position
Communication Interfaces	PROFIBUS, CANopen, Ethernet
Feedback Systems	Resolver, incremental encoder, absolute encoder