Ricoh PRO C7210

1.SC Codes
181
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
 Motor driver overheat detected
 Check the Entrance Motor connection.
 Replace the Entrance Motor.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC730-11
D
Stacker 1 (Upstream): Proof Tray Exit Motor Error
SC731-11
D
Stacker 2 (Downstream): Proof Tray Exit Motor Error
Motor driver detected an error. (SC from the first time)
 Motor defective
 Motor driver overcurrent
 Motor driver overheat detected
 Check the Proof Tray Exit Motor connection.
 Replace the Proof Tray Exit Motor.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC730-12
D
Stacker 1 (Upstream): Transport Motor Error
SC731-12
D
Stacker 2 (Downstream): Transport Motor Error
Motor driver detected an error. (SC from the first time)
 Motor defective
 Motor driver overcurrent
 Motor driver overheat detected
 Check the Transport Motor connection.
 Replace the Transport Motor.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC730-13
B
Stacker 1 (Upstream): Shift Exit Motor Error
SC731-13
B
Stacker 2 (Downstream): Shift Exit Motor Error
Motor driver detected an error. (SC from the first time)
 Motor defective
 Motor driver overcurrent
 Motor driver overheat detected
 Check the Shift Exit Motor connection.
 Replace the Shift Exit Motor.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC730-
20
D
Stacker 1 (Upstream): Proof Tray JG Motor Error