Ricoh PRO C7210

1.SC Codes
364
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
 Replace the PCB.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC780-
07
B
LCT1: Bridge Unit Cooling Fan error
Cooling fan alarm “H (error)” is detected while the cooling fan on the bridge unit
of LCT1 is ON.
 Cooling fan defective
 Connector disconnected
 Harness broken
 PCB on the LCT1 defective
 Reconnect the connector.
 Replace the cooling fan.
 Replace the harness
 Replace the PCB on the LCT1.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC780-
08
B
LCT1: Transport Motor Cooling Fan error
Cooling fan alarm “H (error)” is detected while the Transport Motor Cooling Fan
on the LCT1 is ON.
 Transport Motor Cooling Fan on the LCT1 defective
 Connector disconnected
 Harness broken
 PCB defective
 Reconnect the connector.
 Replace the Transport Motor Cooling Fan on the LCT1.
 Replace the harness
 Replace the PCB.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC780-
09
B
LCT1: Transport Motor Cooling Fan error
Cooling fan alarm “H (error)” is detected while the Transport Motor Cooling Fan
on the LCT1 is ON.
 Transport Motor Cooling Fan on the LCT1 defective
 Connector disconnected
 Harness broken
 PCB defective
 Reconnect the connector.