1.SC Codes
379
Error Name/Error Condition/Major Cause/Solution
Abnormal temperature of the CPU0 found in a hardware error check.
The fan or CPU may be defective, the fan may be in contact with the CPU, or the
heat vent of the DFE housing may be blocked.
1. Turn OFF the power of the DFE, leave it for a while, and then restart it.
2. Replace the CPU.
3. Replace the CPU fan.
4. Replace the mother board of the DFE.
Error Name/Error Condition/Major Cause/Solution
Abnormal temperature of the CPU0 found in a hardware error check.
The fan or CPU may be defective, the fan may be in contact with the CPU, or the
heat vent of the DFE housing may be blocked.
1. Turn OFF the power of the DFE, leave it for a while, and then restart it.
2. Replace the CPU of the DFE.
3. Replace the CPU fan of the DFE.
4. Replace the mother board of the DFE.
Error Name/Error Condition/Major Cause/Solution
Memory configuration has changed
Error generated when the memory requirements are no longer satisfied due to a
change in memory configuration.
This error may occur at the first boot after installation of the OS in a rare situation.
In other cases, this error implies that the memory or the board may be defective.
Or, this may occur when the memory can no longer be detected due to, for
example, a mother board failure because the BOS stores information on the
memory size at the time of last startup.
2. Replace the DIMM of the DFE.
Error Name/Error Condition/Major Cause/Solution
To Next Page
Loading...
