Ricoh PRO C7210

1.SC Codes
381
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC911-
48
B
Checksum error on configuration file
-
Checksum error on the configuration file
This may be caused also by backup/restoration between an inappropriate
combinations of versions.
1. Reboot the DFE.
2. Reinstall the DFE System.
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC911-49
B
Hard disk backup to USB storage device failure
-
Error in backing up data to a USB storage device
1. Reboot the DFE.
2. Replace the USB storage device for backup.
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC911-50
B
Microcode update failed
-
Software update error
1. Reboot the DFE.
2. Obtain the file for update and try update again.
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC911-
55
B
VM option H/W error
-
Error (failure, poor connection, no response, etc.) related to VM options (HDD,
USB controller, and graphic board)
1. Reboot the DFE.
2. Replace the HDD for VM, USB controller board, or graphic board.
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC911-56
B
Xen VM S/W error
-
Error generated when Xen VM does not start or run
1. Reboot the DFE.
2. Reinstall the DFE System.