Rohde & Schwarz R&S SGS100A

To Next Page

To Previous Page

Understanding the R&S SGMA-GUI software

R&S

SGS100A

63User Manual 1173.9105.02 ─ 13

Remote command:

:INSTruments:COUNt? on page 86

:INSTruments:NAME on page 87

:INSTruments:TYPE on page 90

:INSTruments:ACTive[:STATe] on page 85

Scan

Triggers a scan function and searches for instruments connected to the remote com-

puter via all the available interfaces. During the scan process, a progress bar is dis-

played.

Tip: The first initialization of a newly connected instrument in a network and the instru-

ment's request to the DHCP server for an IP address may take some time. During this

time, the instrument does not respond to the query sent by the scan function. If the

instrument does not appear in the list of "Available Instruments", trigger the scan func-

tion again after some minutes.

Remote command:

:INSTruments:SCAN on page 88

New

Calls the Add/Edit instruments dialog.

Delete

Removes the selected instrument from the list of Available Instruments.

Clear

Removes all instruments from the list of Available Instruments.

Edit

Calls the Add/Edit instruments dialog.

Export

Opens the standard file save browser for saving the list of the available instruments in

a mapping file. The mapping files have the file extension .map so the filename typed in

is automatically equipped with this extension.

A mapping file provides a cross-reference between the instruments' symbolic names

and their respective remote control parameters. The information in the mapping file is

grouped in rows, where one row corresponds to one configured instrument. The rows

have the following structure:

Operating menu and toolbar

Rohde & Schwarz R&S SGS100A - Page 63