Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
62User Manual 1173.9105.02 ─ 13
Refer to Chapter 8.4.2, "Handling instruments in the R&S SGMA-GUI", on page 75 for
information on how to configure and manage instruments in R&S SGMA-GUI.
Available Instruments....................................................................................................62
Scan..............................................................................................................................63
New...............................................................................................................................63
Delete............................................................................................................................63
Clear..............................................................................................................................63
Edit................................................................................................................................63
Export............................................................................................................................63
Scan LAN instruments with host name prefix............................................................... 64
Scan Subnet..................................................................................................................64
IP Address.....................................................................................................................64
Prefix Length.................................................................................................................64
Available Instruments
This section comprises a list of configured instruments. Each instrument is represented
by a "Symbolic Name" which is also displayed in the main panel and an "Instrument
Type". It is also displayed whether the instrument is activated in the R&S SGMA-GUI
and hence displayed in the main panel or not.
Operating menu and toolbar
To Next Page
Loading...
