SATO FX3-LX - Bluetooth Interface Connection (Optional)

Bluetooth Interface Connection (Optional)
144
The printer performs data communication using the wireless LAN/Bluetooth kit.
The communication condition settings must be configured according to your network environment. Set
the IP address of the printer.
The IP address of the printer can be set through the printer's [Wi-Fi] menu or the All-In-One Tool.
• To use the printer driver, the communication protocol must be set to Status4. (The
initial value of the communication protocol for the printer's wireless LAN interface is
Status4 ENQ.)
• The printer does not support Atheros, SuperG, or XR functions.
Bluetooth Interface Connection (Optional)
Check if the wireless LAN/Bluetooth kit (1) is attached to the printer.
The printer performs data communication using the wireless LAN/Bluetooth kit.
The printer can perform wireless communication with Bluetooth-compatible computers placed within
about 10 meters (32.8 feet) from it.