SATO FX3-LX User Manual

[Start on AC]
290
[NFC Security]
Set whether to show the confirmation message or enable the password input before settings are
written to the printer from an Android device with the NFC interface.
To use the NFC Security function, the settings must be written from the Android device while the
printer is powered off. The confirmation message or password input screen is shown when the printer
is powered on.
The options are as follows:
None
No confirmation message is shown and no password is required before the settings are written to
the printer.
Confirm
The confirmation message is shown before the settings are written to the printer.
Password
You need to enter the password set in the [Password] menu before the settings are written to the
printer.
[Change Password]
Change the password.
You can enter 4 to 32 characters. Alphabets (capital and small letters), numbers and symbols can be
used.
The setting items are as follows:
admin
This is the setting item for factory.
Strictly for SATO authorized personnel use.
manager
The password for accessing the [Service] menu.
Strictly for SATO authorized personnel use.
level1
The password for accessing the [Settings] menu.
• The [admin] and [manager] passwords are for factory and maintenance personnel. You
cannot change these passwords.
[Start on AC]
Set whether to power on/off the printer by powering on/off the main power source.
Power on/off the printer by powering on/off the main power source.

SATO FX3-LX Specifications

General

Cutter	Yes
Certification	EN55032, EN55024, EN61000-3-2 / 3-3, EN300 330-2 / -1, EN301 489-1 / -3 / -17, FCC Part15 Subpart B, ICES 003 UL60950-1, CSA C22.2 No.60950-1, IEC/EN60950-1 FCC Part15 Subpart C/E, ISED RSS-Gen, ISED RSS-247, EN 300 328, EN 301 893
Built-in barcodes	AZTECCODE, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN13, EAN8, GS1 COMPOSITE, GS1 DataBar, GS1-128, Industrial 2/5, Interleaved 2/5, Matrix 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Built-in RFID module	No
Maximum resolution	- DPI
Maximum print height	500 mm
Maximum printing width	80 mm
Battery voltage	14.4 V
AC input voltage	100 - 240 V
Battery capacity	1950 mAh
AC input frequency	50 / 60 Hz
Suitable for use in country/location	Europe
Sustainability certificates	ENERGY STAR
Display	LCD
Control type	Touch
Product color	White
Display diagonal	7 \
Display resolution	480 x 800 pixels
International Protection (IP) code	IPX2
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
USB 2.0 ports quantity	4
Connectivity technology	Wired & Wireless
Media thickness	0.14 - 0.19 mm
Maximum roll diameter	105 mm
Storage temperature (T-T)	-5 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 75 %
Cables included	AC
Quantity per pack	1 pc(s)
Languages support	Multi

Weight and Dimensions

Depth	225 mm
Width	132 mm
Height	180 mm
Weight	3000 g