SATO FX3-LX - Printing Menu

219
[Printing] Menu
The following settings are available in the [Printing] menu:
[Label Length]
Set the length of the media.
The setting range of the label length is 1 to 6000 dots.
• The length of 1 dot is 0.083 mm (0.0033").
• You can change the unit to dots or inches in the [System] > [Regional] > [Unit] menu.
• Set the label size to a value that includes the liner.
[Label Width]
Set the width of the media.
The setting range of the label width is 1 to 960 dots.