EasyManua.ls Logo

SATO FX3-LX - Connecting the USB Memory Inside the Printer

SATO FX3-LX
566 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
73
Connecting the USB Memory Inside the Printer
The USB memory can be connected not only at the back side of the printer but also inside the printer.
When using the printer with the USB memory at all times, it is convenient to connect it inside the
printer.
The size of the USB memory that can be connected inside the printer is as follows.
Length: under 37 mm (1.46") (excludes the metal part of the connector)
Width: under 20 mm (0.79")
Thickness: under 8 mm (0.31")
1. Press the cover open button (1) to open the top cover (2).
2. Remove media if it is already loaded.
3. Move the media guide (4), which is on the right, inward while pressing the slide
lever (3).

Table of Contents

Other manuals for SATO FX3-LX

Related product manuals