SATO FX3-LX - [Bluetooth] Menu

[Bluetooth] Menu
414
[Bluetooth] Menu
The initial value refers to the setting value of the printer when it was shipped from the factory. The
table below shows the initial value of each setting item.
Setting Item Initial Value
[Enable] Enabled
[Name] SATO PRINTER_xxxxxxxx
(BD address)
[PIN Code] 0000
[BD Address] xxxxxxxxxxxx
[Firm Version] tlv_tf_1.1
[Host BD Addr] -
[Pairing]
[Available devices] -
[Paired devices] -
[IAP Ready] Enabled
[iOS Reconnect] Disabled
[Authentication] Level 4
[ISI] 2048
[ISW] 18
[PSI] 2048
[PSW] 18
[CRC Mode] Disabled
[Flow Control] STATUS4 MULTI