339
Tools
Various settings and operations can be performed in this page: installing certificates for authentication,
checking the log, and test printing.
• Login is required to view [Tools] page. Click [Login] to log in before opening [Tools]
page.
The default user is [settings], and the default password is "0310".
(1) [Upload]
You can do the setting equivalent to [Tools] > [Install Certificates] in the Settings mode. Install
certificates used for Wi-Fi authentication and for HTTPS.
Click [Browse] of the certificate you want to install.
Select the certificate file from the list and click [Upload], and the authentication file will be
installed.
(2) [Clone]
You can do the setting equivalent to [Tools] > [Clone] in the Settings mode. Copy the current
printer settings and the installed data.
(3) [Install Package]
Refer to "Section 2.8 Checking and Updating the Firmware" of the FX3-LX service manual.
(4) [Logs]
List all log files in the log directory. Users can click to download the file.
(5) [Reset]
Initialize the settings or data of the printer.
(6) [Passwords]
You can do the setting equivalent to [System] > [Password] > [Change Password] in the Settings
mode. Change each password of the printer.
(7) [Test Print]
You can do the setting equivalent to [Tools] > [Test Print] in the Settings mode. Perform a test
print.
To Next Page
Loading...
