Cleaning
418
Maintenance
Cleaning the Printer
Cleaning
A dirty print head or platen roller not only affects the print quality but also causes errors. Use a
cleaning kit or cleaning sheet to clean the printer regularly.
• Do not connect or disconnect the power cord while your hands are wet. Doing so could
cause an electric shock.
• Disconnect the power cord from the AC outlet or remove the optional battery before
you begin cleaning.
The print head and its surroundings are hot after printing. Wait until the printer cools
down.
• Touching the edge of the print head with your bare hand could cause injury.
• Be careful not to touch the cutter blade when cleaning the printer.
• Use a cotton swab or cotton cloth from a cleaning kit to clean. Do not clean with a hard
object. Doing so could cause damage.
• Remove the media before cleaning.
• The printer cleaning kit and cleaning sheet are optional. Contact your SATO reseller or
technical support center to purchase the options.