SATO FX3-LX - Applications Menu

263
[Applications] Menu
The following settings are available in the [Applications] menu:
[Protocol]
Set the printer language.
The options are as follows:
AUTO
Automatically analyze the received print data and set the printer language. In [AUTO] mode, the
printer can change the language after startup by receiving another language.
SBPL
Set when you use the SBPL printer language or XML.
SZPL
Set when you use the SZPL printer language.
SIPL
Set when you use the SIPL printer language.
SDPL
Set when you use the SDPL printer language.