SATO FX3-LX - [Wi-Fi] Menu

415
[Wi-Fi] Menu
The initial value refers to the setting value of the printer when it was shipped from the factory. The
table below shows the initial value of each setting item.
Setting Item Initial Value
[Enable] Enabled
[Wi-Fi Setting]
[IPv4 (Wi-Fi)]
[Mode] DHCP
[DHCP] -
[IP Address] 0.0.0.0
[Netmask] 255.255.255.0
[Gateway] 0.0.0.0
[DNS] 0.0.0.0
[IPv6 (Wi-Fi)]
[Mode] Disable
[DHCP] -
[IP Address] ::
[Prefix Length] 64
[Gateway] ::
[DNS] ::
[Proxy (Wi-Fi)]
[Enabled] Disabled
[Server] -
[Exclude] -
[Port]
[Port1] 1024
[Port2] 1025
[Port3] 9100