389
Adjusting the Print Quality
Adjusting the Print Darkness
The adjustment procedure for the print darkness is as follows:
• You can fine tune the print darkness by setting the [Darkness Adjust] in the [Printing] >
[Advanced] > [Adjustments] menu.
• When the [Printing] > [Advanced] > [Prioritize] menu has been set to [Commands], the
data will be printed with the print darkness specified by command.
• While the print job is paused, the [Adjustments] menu will appear instead of the
[Settings] menu and you can adjust the print darkness.
1.
Tap on the Home screen or Offline screen to show the [Settings] menu.
2. Input the password if it is enabled.
3. Tap [Printing].
4. Tap [Darkness].
To Next Page
Loading...
